TECO JNTMBG 0005AZ Series User Manual

1-1
1. 7200 MA Handling Description
1.1 Inspection Procedure upon Receiving
Before delivery, Every 7200 MA inverter has been properly adjusted and passed
the demanding function test. After receiving the inverter, the customer should take it
out and follow the below procedure:
‧Verify that the Type No. of the inverter you’ve received is the same as the Type No.
listed on your purchase order. (Please read the Nameplate)
‧Observe the condition of the shipping container and report any damage immediately
to the commercial carrier that have delivered your inverter.
■ Inverter nameplate:
MODEL
INPUT
OUTPUT
SER. NO.
JNTMBGBB0001AZSU -
440V CLASS INVERTER
AC 3PH 380-480V 50/60Hz
AC 3PH 0-480V 2.2KVA 2.6A
INVERTER MODEL
INPUT SPECIFICATION
OUTPUT SPECIFICATION
SERIES NO.
■ Inverter model number：
JNTMBGBB0001AZSU -
7200M
A
SERIES
Reserved
Rated Voltage
JK :200 ~ 240V
AZ:380 ~ 480V
UL Information
U :UL / cUL Standard
- :Without UL/cUL Standard
Enclosure and Mounting
BA: Open Chassis (IP00)
BB: Enclosured, Wall-mounting Type (NEMA1)
BC: NEMA4 Type
Hardware Information
- :Standard Type
S :220V/440V, 1/2HP Compact Size Type
A:220/440V 7.5/10HP Ver.2 Type
Max. Applicable Motor Capacity (HP)
0001：1HP
0075： 75HP
~ ~
NEMA4 only to 20HP

TECO JNTMBG 0005AZ Series Specifications

General

Brand	TECO
Model	JNTMBG 0005AZ Series
Category	Inverter
Language	English

Summary

Handling and Installation

Inspection Procedure upon Receiving

Steps to inspect the inverter upon receiving it.

Installation Guidelines

Requirements for inverter installation, including air clearance and location.

Operator and Cover Maintenance

Digital Operator and Front Cover Procedures

Procedures for removing/attaching operator and cover for various models.

Wiring and Connectivity

Wiring Between Inverter and Peripheral Devices

Notices and precautions for connecting peripheral devices.

Terminal Functions and Wiring Diagrams

Description of main/control terminals and wiring diagrams.

Wiring Precautions and Grounding

Guidelines for proper grounding and external circuit wiring.

Specifications, Dimensions, and Components

Inverter Specifications

Key electrical and performance specifications for 220V and 440V series.

Dimensions and General Specifications

Physical dimensions, control characteristics, protection, and environmental conditions.

Peripheral Units and Fuse Types

Details on resistors, reactors, filters, operators, and fuses.