TECO JNTMBG 0015AZ Series User Manual

1-1
1. 7200 MA Handling Description
1.1 Inspection Procedure upon Receiving
Before delivery, Every 7200 MA inverter has been properly adjusted and passed
the demanding function test. After receiving the inverter, the customer should take it
out and follow the below procedure:
‧Verify that the Type No. of the inverter you’ve received is the same as the Type No.
listed on your purchase order. (Please read the Nameplate)
‧Observe the condition of the shipping container and report any damage immediately
to the commercial carrier that have delivered your inverter.
■ Inverter nameplate:
MODEL
INPUT
OUTPUT
SER. NO.
JNTMBGBB0001AZSU -
440V CLASS INVERTER
AC 3PH 380-480V 50/60Hz
AC 3PH 0-480V 2.2KVA 2.6A
INVERTER MODEL
INPUT SPECIFICATION
OUTPUT SPECIFICATION
SERIES NO.
■ Inverter model number：
JNTMBGBB0001AZSU -
7200M
A
SERIES
Reserved
Rated Voltage
JK :200 ~ 240V
AZ:380 ~ 480V
UL Information
U :UL / cUL Standard
- :Without UL/cUL Standard
Enclosure and Mounting
BA: Open Chassis (IP00)
BB: Enclosured, Wall-mounting Type (NEMA1)
BC: NEMA4 Type
Hardware Information
- :Standard Type
S :220V/440V, 1/2HP Compact Size Type
A:220/440V 7.5/10HP Ver.2 Type
Max. Applicable Motor Capacity (HP)
0001：1HP
0075： 75HP
~ ~
NEMA4 only to 20HP

TECO JNTMBG 0015AZ Series Specifications

General

Series	JNTMBG 0015AZ
Category	Inverter
Power	1.5 kW
Frequency	50/60 Hz
Protection Features	Overload, Overvoltage, Short Circuit
Cooling Method	Fan
Storage Temperature	-20°C to 60°C

Summary

7200 MA Handling Description

Inspection Procedure upon Receiving

Steps for inspecting the inverter upon delivery.

Installation Requirements

Air Clearance for Wall Mounting

Required clearance for side, top, and bottom mounting.

Installation Site Conditions

Ambient Temperature and Location

Recommended ambient temperature and location requirements.

Digital Operator and Front Cover Procedures

Compact Size Type Operator/Cover Handling

Procedure for removing/mounting operator and cover.

Standard Type Operator and Cover Handling

Removing the Digital Operator

Steps to detach the digital operator.

Removing the Front Cover

Steps to detach the front cover.

Mounting the Front Cover and Operator

Advanced Type Operator and Cover Handling

Removing Digital Operator (15-25HP)

Removing Front Cover (15-25HP)

Mounting Front Cover and Operator (15-25HP)

High HP Type Front Cover Handling

Removing Front Cover (30-40HP)

Mounting Front Cover (30-40HP)

Wiring and Peripheral Device Guidelines

General Wiring Safety Precautions

Safety precautions for wiring and handling.

Wire Sizing and Voltage Drop Calculation

Fast-Acting Fuse Installation Recommendation

Peripheral Device Connection Examples

Power Supply and Protection Device Connection

Inverter and Motor Connection Guidance

Standard Connection Diagrams

Compact Size Model Wiring Diagram

Standard Connection Diagrams (Continued)

Standard Type Model Wiring Diagram

Terminal Function Descriptions

Main Circuit Terminal Functions

Summary of main circuit terminal functions.

Terminal Block Configuration Layouts

Control Circuit Terminal Details

Control Circuit Terminal Functions List

List and functions of control circuit terminals.

Control Circuit Wiring Precautions

Main Circuit Wiring Diagrams

Wiring Diagrams for 1-20HP Models

Wiring Diagrams for 25-30HP Models

Wiring Diagrams for 30-75HP Models

Main Circuit Wiring and Notices

Main Circuit Wiring Installation Guidelines

Installation of NFB and leakage current breaker.

Wire Size and Connector Specifications Table

External Circuit Wiring Precautions

Control Circuit Wiring Guidelines

Main Circuit Terminal Wiring Guidelines

Grounding and Cable Management

Proper Grounding Techniques and Examples

Proper grounding methods and examples.

Carrier Frequency Adjustment by Cable Length

Inverter Specifications

220V Series Basic Specifications

Basic specifications for 220V series inverters.

440V Series Basic Specifications

Basic specifications for 440V series inverters.

General Inverter Specifications Overview

Control Characteristics Summary

Details on control modes, frequency, and speed.

Protection Functions Details

Overload, overvoltage, undervoltage, and overheat protections.

Environmental Operating Conditions

Peripheral Unit Selection

Braking Resistor Options and Specifications

Input Noise Filter Selection and Specifications

Input Noise Filter Details and Purpose

Input Noise Filter Model Table

Fuse Type Specifications

220V Class Fuse Types and Ratings

Fuse types and ratings for 220V class inverters.

440V Class Fuse Types and Ratings

Fuse types and ratings for 440V class inverters.

Semiconductor Protection Fuse Specifications

Specifications for semiconductor protection fuses.