Need help?Do you have a question about the TECO e510 series and is the answer not in the manual?
General| Control Method | V/F control, Sensorless vector control |
|---|---|
| Frequency | 50/60 Hz |
| Enclosure Rating | IP20 |
| Input Voltage | 200-240V |
| Protection Features | Overcurrent, Overvoltage, Undervoltage, Overheat |
| Communication | RS485, Modbus |
| Power Range | 0.4kW~400kW |
| Operating Temperature | -10°C to 50°C |
| Storage Temperature | -20°C ~ +60°C |
| Humidity | 5% ~ 95% RH, non-condensing |
| Cooling Method | Forced air cooling |
| Output Voltage | 3-phase 0~rated input voltage |
Essential checks and precautions before applying power to the inverter.
Safety considerations and operational behavior of the inverter during power application.
Detailed procedures and considerations for installing the inverter correctly.
Comprehensive instructions for proper wiring of power and control circuits.
Detailed technical specifications covering product and general operational parameters.
Standard wiring diagrams for single-phase, single/three-phase, and three-phase connections.
Description of main circuit and control circuit terminals for wiring.
Detailed explanations for each parameter group and specific parameter functions.
Guides for identifying and resolving inverter errors via display codes.
General troubleshooting steps for common motor and inverter operational issues.
Detailed troubleshooting procedures for specific inverter fault conditions.
Checklist and schedule for regular inverter inspection and maintenance.
Guidelines and procedures for performing maintenance on the inverter.
Critical safety warnings and precautions for handling and operating the drive.
To Next Page