4- 89
4. Running Instruction
Symbol Description
Running mode could be set via
I1~f8
OFF:(FWD)
ON:(REV)
Preset Speed could be set via
I1~f8
OFF:Operating at the frequency
set on
ON:Operating at the frequency
set on
Selected frequency for constant
or V3, V4, V5
Selected Preset frequency for
constant or V3, V4, V5
Acceleration Time (ACC Time)
Deceleration Time(DEC Time)
Instruction code of operation
(F1~F8, Total: 8Groups)
Sample:
I1
F1
（F1）
（Q1）
ON/OFF of I1 controls the Run/Stop
status of F1
50.00
20.00
60.0
30.0
F1
M1
M2
When Inverter operating F1=ON,
The input terminal of F1 in the ladder
program mode should be ON
Input under the Function Program Mode
Input under the Ladder Program Mode
5
6
7
2
1
3
4
To Next Page
Loading...
