TECO e510 series - Parameter Lock Key Code; Reset Drive to Factory Settings

4-78
13- 07 Parameter Lock Key Code
Range
【00000~65535】
 When a parameter lock key number is entered in parameter 13-07. For any parameter modification
the key number has to be entered.
See following Parameter lock key setting example:-
 Setting Parameter lock key number example:
Step1:
1st entry
▲
▼
or
</ENT
</ENT
Step2：
2nd entry
</ENT
▲ ▼
or
</ENT
Set Password successfully
Set Password failed
▲
▼
or
</ENT
Key code (password) unlock
Lifting
Password
</ENT
▲
▼
or
</ENT
Password successfully lifted
Password failed to lift
▲
▼
or
</ENT
13- 08 Reset Drive to Factory Settings
Range
1150: Reset to factory setting. 50Hz,220V/380V system.
1160: Reset to factory setting. 60Hz,220V/380V system.
1250: Reset to factory setting 50Hz,230V/400V system.
1260: Reset to factory setting 60Hz,230V/460V system.
1350: Reset to factory setting 50Hz,220V/415V system.
1360: Reset to factory setting 60Hz,230V/400V system.