TECO e510 series - Analog Comparator

4- 88
3. Analog comparator
Symbol Description

Analog comparison mode (1-3)

Selection of the input comparison
value
(AS1~AS4,MD1~MD4,T1~T8,C1~C8,V
1~V7)

Setting reference comparison value
(up limit)

Setting reference comparison value
(Upper Limit)
(AS1~AS4,MD1~MD4,T1~T8,C1~C8,V
1~V7,count)

Setting reference comparison value
(Lower Limit)
(AS1~AS4,MD1~MD4,T1~T8,C1~C8,V
1~V7,count)

Output terminals of analog
comparator(G1~G4)
Analog Comparison Mode (1-3)
(1) Analog comparator mode 1 ( ≤ ,  ON)
(G1)
（T1）
The target value of G1 is
determined by the
present value of T1
1
4.0
G1
T1
Input under the Function Program Mode
Input under the Ladder Program Mode
0.3
Because present input
Value(0.3)<lower
limit(4.0),so G1is ON
Analog comparision mode is model
Lower limit is 4.0
The present value of Timer 1 is 0.3
The number of Analog
comparision:G1~G8
(2) Analog comparator mode 2 ( ≥ ,  ON)
(3)
Analog comparator mode 3 ( ≤  ≤ ,  ON)
1
3
4
2
6
5