TECO SPEECON GS510 - User Manual

INVERTER
INSTRUCTION MANUAL
220V Class 3Φ 25~100HP
440V Class 3Φ 25~500HP
Please hand this manual to the end-users. It will be of
great help for their daily operation, maintenance,
inspection and troubleshooting.
7200GS/GS510
SPEECON

Summary

BEFORE INSTALLATION & USE

WARNING

1. WIRING

1.1 NOTES ON WIRING TO PERIPHERAL UNITS

Guidance on connecting input/output peripherals and components.

1.2 CONNECTION DIAGRAM

Diagram illustrating main and control circuit interconnections for the inverter.

1.3 TERMINAL FUNCTION

Details the functions of main and control circuit terminals.

1.4 WIRING PARTS

Recommended wiring parts like MCCBs, cables, and contactors for 220V/440V classes.

GROUNDING (PE: Protective Earth)

Guidelines for proper grounding of the inverter unit.

1.5 SPECIFICATIONS

CHARACTERISTICS

1.6 DIMENSIONS

2. DESCRIPTION OF USING 7200 GS;GS510

2.1 Using LCD (OR LED) digital operator

Details on using LCD and LED digital operators, including modes and display.

2.3 Parameter description

Description of the four user parameter groups (An, Bn, Sn, Cn).

3. SETTING USER CONSTANT

3.1 Frequency command (in Multi-speed operation) An-

Details on setting frequency commands for multi-speed operation.

3.2 Parameters Can Be Changed during Running Bn-

Parameters that can be modified while the inverter is running.

3.3 Control Parameters Cn-

Control parameters affecting inverter operation and settings.

3.4 System Parameters Sn-

System parameters for configuration and operation status.

3.5 Monitoring Parameters Un-

Parameters for monitoring inverter status and performance.

3.6 Monitoring Parameters Hn-

Parameters for monitoring inverter input/output interface status in PRGM mode.

3.7 Order Parameters On-

Order parameters, typically factory-set for optimal performance.

4. FAULT DISPLAY AND TROUBLESHOOTING

B.) Warning and Self-Diagnosis Functions

Explains warning indicators and self-diagnosis functions of the inverter.

TECO SPEECON GS510 Specifications