TECO 7200 MA Series User Manual

1-1
1. 7200 MA Handling Description
1.1 Inspection Procedure upon Receiving
Before delivery, Every 7200 MA inverter has been properly adjusted and passed
the demanding function test. After receiving the inverter, the customer should take it
out and follow the below procedure:
‧Verify that the Type No. of the inverter you’ve received is the same as the Type No.
listed on your purchase order. (Please read the Nameplate)
‧Observe the condition of the shipping container and report any damage immediately
to the commercial carrier that have delivered your inverter.
■ Inverter nameplate:
MODEL
INPUT
OUTPUT
SER. NO.
JNTMBGBB0001AZSU -
440V CLASS INVERTER
AC 3PH 380-480V 50/60Hz
AC 3PH 0-480V 2.2KVA 2.6A
INVERTER MODEL
INPUT SPECIFICATION
OUTPUT SPECIFICATION
SERIES NO.
■ Inverter model number：
JNTMBGBB0001AZSU -
7200M
A
SERIES
Reserved
Rated Voltage
JK :200 ~ 240V
AZ:380 ~ 480V
UL Information
U :UL / cUL Standard
- :Without UL/cUL Standard
Enclosure and Mounting
BA: Open Chassis (IP00)
BB: Enclosured, Wall-mounting Type (NEMA1)
BC: NEMA4 Type
Hardware Information
- :Standard Type
S :220V/440V, 1/2HP Compact Size Type
A:220/440V 7.5/10HP Ver.2 Type
Max. Applicable Motor Capacity (HP)
0001：1HP
0075： 75HP
~ ~
NEMA4 only to 20HP

TECO 7200 MA Series Specifications

General

Brand	TECO
Model	7200 MA Series
Category	Inverter
Language	English

Summary

7200 MA Handling Description

Inspection Procedure upon Receiving

Procedure for inspecting the inverter upon receiving it after delivery.

Inverter Nameplate Interpretation

Inverter Model Number Breakdown

Breakdown and explanation of the inverter model number components.

Installation Guidelines

Mounting Air Clearance Requirements

Digital Operator and Front Cover Handling

Compact Size Model Handling

Procedure for removing and mounting the digital operator and front cover for compact size models.

Specific Series Model Handling

220V 15-25HP / 440V 15-30HP Series

Procedure for removing and mounting the digital operator and front cover for these series.

220V 30-40HP / 440V 40-75HP Series

Procedure for removing and mounting the front cover for these series.

Wiring between Inverter and Peripheral devices and notice

Standard Connection Diagram

Compact Size Models (220V/440V 1-2HP)

Standard connection diagram for compact size 220V/440V inverter models.

Standard Connection Diagram (Continued)

Standard Type Models (220V 3-40HP / 440V 3-75HP)

Standard connection diagram for standard type 220V/440V inverter models.

Description of terminal function

Table 1 Main circuit terminals

Terminal block configuration

Control circuit terminals

Main Circuit Wiring Diagram

1. 220V/440V: 1~20HP

2. 220V: 25HP 440V: 25~30HP

3. 220V : 30~40HP 440V: 40~75HP

Wiring main circuit and notice

Main circuit wiring

Installation of NFB, MCB, and leakage current breakers for main circuit wiring.

Table 3 220V and 440V class applicable wire size and connector

External circuit wiring precaution

(A) Control circuit wiring

Precautions for separating and routing control circuit wiring to avoid noise.

(B) Wiring the main circuit terminals

Guidelines for wiring main circuit terminals, including input power and output connections.

GROUNDING

Inverter Specifications

(a) 220V Series

Basic specifications for the 220V series inverters, including power and output characteristics.

(b) 440V Series

Basic specifications for the 440V series inverters, including power and output characteristics.

General Specifications

Control Characteristics

Details on operation mode, control mode, frequency control, and speed accuracy.

Protection Function

Overview of various protection functions like overcurrent, overload, and overvoltage.

Environmental Condition

Dimensions

Inverter Open Chassis Type (IP00) (mm)

Enclosed Type (NEMA1) (mm)

Peripheral Units

Braking resistors

FUSE TYPES

220V class

440V class

Fuse Type Specifications