TECO e510 series - 3.6 Terminal Description

3-44
3.6 Terminal Description
3.6.1 Description of main circuit terminals
Terminal symbols TM1 Function Description
L1(L)
Main power input: Single phase: L1(L)/L3(N)
Single/Three phase:L1(L)/L2/L3(N)
Three phase:L1/L2/L3
L2
L3(N)
T1
Inverter output, connect to U/V/W terminals of motor
T2
T3
P
Braking resistor connection terminal: Used in applications when it is required to stop a
high inertia load rapidly. (refer to specifications of the braking resistor)
BR
Ground terminal
Frame1
Single phase: 200V 0.5~1HP
Note: the screw on L2 terminal is removed for the single phase input supply models.
Single/Three phase:200V 0.5~1HP; Three phase:200V 2HP; 400V 1~2HP;
L1(L) L2 L3(N) T1 T2 T3
P
BR
L1(L) L2 L3(N) T1 T2 T3
P
BR