EasyManua.ls Logo

TECO e510 series - Auto Run( Sequencer) Mode Selection; Auto Run(Auto Sequencer) Function

TECO e510 series
222 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4-59
06- Auto Run(Auto Sequencer) Function
06- 00 Auto Run( sequencer) mode selection
Range
0:Disabled
1:Single cycle (Continues to run from the unfinished step if restarted).
2:Periodic cycle. (Continues to run from the unfinished step if restarted).
3:Single cycle, then holds the speed of final step to run.
(Continues to run from the unfinished step if restarted).
4:Single cycle. (Starts a new cycle if restarted).
5:Periodic cycle. (Starts a new cycle if restarted).
6:Single cycle, then hold the speed of final step to run.
(Starts a new cycle if restarted).
Frequency of the step 0 is set by parameter 05-01 keypad Frequency.
06- 01 Auto _ Run Mode Frequency Command 1
06- 02 Auto _ Run Mode Frequency Command 2
06- 03 Auto _ Run Mode Frequency Command 3
06- 04 Auto _ Run Mode Frequency Command 4
06- 05 Auto _ Run Mode Frequency Command 5
06- 06 Auto _ Run Mode Frequency Command 6
06- 07 Auto _ Run Mode Frequency Command 7
06- 08 Auto _ Run Mode Frequency Command 8
06- 09 Auto _ Run Mode Frequency Command 9
06- 10 Auto _ Run Mode Frequency Command 10
06- 11 Auto _ Run Mode Frequency Command 11
06- 12 Auto _ Run Mode Frequency Command 12
06- 13 Auto _ Run Mode Frequency Command 13
06- 14 Auto _ Run Mode Frequency Command 14
06- 15 Auto _ Run Mode Frequency Command 15
Range
0.00 ~ 599.00Hz
06- 16 Auto_ Run Mode Running Time Setting0
06- 17 Auto_ Run Mode Running Time Setting1
06- 18 Auto_ Run Mode Running Time Setting2
06- 19 Auto_ Run Mode Running Time Setting3
06- 20 Auto_ Run Mode Running Time Setting4
06- 21 Auto_ Run Mode Running Time Setting5
06- 22 Auto_ Run Mode Running Time Setting6
06- 23 Auto_ Run Mode Running Time Setting7
06-24 Auto_ Run Mode Running Time Setting8
06-25 Auto_ Run Mode Running Time Setting9
06-26 Auto_ Run Mode Running Time Setting10
06-27 Auto_ Run Mode Running Time Setting11
06-28 Auto_ Run Mode Running Time Setting12
06-29 Auto_ Run Mode Running Time Setting13
06-30 Auto_ Run Mode Running Time Setting14
06-31 Auto_ Run Mode Running Time Setting15
Range
0.00 ~ 3600.0Sec
06- 32 Auto_ Run Mode Running Direction 0
06- 33 Auto_ Run Mode Running Direction1
06- 34 Auto_ Run Mode Running Direction2
06- 35 Auto_ Run Mode Running Direction3
06- 36 Auto_ Run Mode Running Direction4
06- 37 Auto_ Run Mode Running Direction5

Table of Contents

Related product manuals