TECO e510 series - Output under Current Detection Delay Time

4-50
03- 24 Output Under Current Detection
Range
【0】:disable
【1】:enable
03- 25 Output Under Current Detection Level
Range
【5%~100%】
03- 26 Output under Current Detection Delay Time
Range
【0.0~50.0s】
 When 03-24 = 1, if output current is less than under current detection level, for a preset time 03-26
then ud-C fault will be displayed.
03- 27 Pulse Frequency
Range
【
0.01~0.20】
03- 28 Pulse Frequency Gain
Range
【
0.01~9.99】