TECO TWM50FA - Wash Program and Functions; Cotton; Quick; Synthetic

10
WASH PROGRAM & FUNCTIONS
NOTE: The clothes washer will not start a wash cycle if the selected water
level can not be reached. Please refer to Page 14 for troubleshooting
instructions.
Cotton You can select this program with any water
temperature (20
o
C, 40
o
C, 60
o
C, 90
o
C and cold).
Quick You can select this program with the following water
temperature setting: 20
o
C, 40
o
C and cold.
Synthetic You can select this program with the following water
temperature setting: 20
o
C, 40
o
C, 60
o
C and cold.
Cotton Intensive You can select this program with any water
temperature (20
o
C, 40
o
C, 60
o
C, 90
o
C and cold).
Wool You can select this program with the following water
temperature setting: 20
o
C, 40
o
C and cold.
Spin You can select this program with no water
temperature setting required.
Underwear You can select this program with any water
temperature (20
o
C, 40
o
C, 60
o
C, 90
o
C and cold).
Drum Clean You can select this function and water temperature
90
o
C will be set automatically.
LOADING DETERGENT
To add detergent or rinse additive, pull the detergent
drawer open and carefully pour in the required amount
into the designated compartment. Please refer to the
detergent packaging for dosage instructions according to
your washing requirements. Be sure to select a detergent specifi cally
designed for front load clothes washers (preferably low bubble).
- Main wash detergent
- Rinse additive compartment (softener, bleach, etc.)
9
9
8