EasyManua.ls Logo

TECO TWM50FA - Troubleshooting (Fault Indicators); Door Lock Issue; Water Filling Issue; Drainage Issue

TECO TWM50FA
18 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14
TROUBLESHOOTING
The following table is a list of the fault indicators and corresponding alarms.
Status of Corresponding
Indicators
Door is not closed properly.
Restart after the door is closed
Tap is not open or water
flows too slow.
Inlet valve filter is blocked.
Inlet pipe is twisted.
If water is not supplied
Open the tap or wait till
the water supply
becomes normal.
Check inlet valve filter.
Straighten the water pipe
Check the other taps in
the house.
Outlet hose is blocked or
twisted
Drain pump is blocked
Wash and straighten outlet
hose.
Wash drain pump filter
Temp
90
o
C
Temp
60
o
C
Temp
40
o
C
Temp
20
o
C
Door lock
Description Cause
Please call TECO service if problem persists.
Please call TECO service if problem persists.
Please call TECO service if problem persists.
Possible Solution
Water filling
issue. Filling
time exceeds
7 minutes
Drainage
issue. Draining
time exceeds
3 minutes
For all other issues and error codes, please contact TECO service (refer to Page 15).
Indicator is FLASHING
Indicator is OFF
LEGEND:

Related product manuals