TECshow BEAMER 7R - Page 8

Control Menu -Setting up Menu
Remark: Each MENU level should press ENTER to save data. If
need to back to last class, press MENU; If no any operation for
30 seconds, LCD display will turn o automatically.
Menu Function Enter Operation
MENU
DMX To 15CH / 16CH, ENTER to save.
Pan
To YES/ NO, ENTER to save. YES stands for anticlockwise
run; NO for clockwise run
Tilt
To YES/ NO, ENTER to save. YES stands for anticlockwise
run; NO for clockwise run
Color
To YES/NO, ENTER to save. YES is color ne, NO is color
skip
Lamp To YES/NO, ENTER to save. O for lamp o, ON is lamp on.
Mode To Mode Slave: master/slave mode, ENTER to save
Manual
Choose CH1 to CH16 manually-ENTER-UP/DOWN to adjust
DMX value press ENTER to save
Press ENTER Reset ALL Press ENTER, system reset
Restore Reset Pan Tilt Press ENTER, Pan/Tilt reset
UP / DOWN Reset Gobo Press ENTER, Gobo reset
Reset Color Press ENTER, color reset
Reset Focus Press ENTER, focus reset
Reset Dimmer Press ENTER, dimmer reset
Reset Prism Press ENTER, prism reset
Reset Fog Press ENTER, for eect reset
Mode Auto run Pre-program mode, enter to save
Restore Factory Spare
p. 8BEAMER 7R
ENGLISH VERSION