Need help?Do you have a question about the TECshow nebula 18 and is the answer not in the manual?
General| Beam Angle | 25 degrees |
|---|---|
| Power Consumption | 180W |
| Power Supply | AC 100-240V, 50/60Hz |
| Input Voltage | AC 100-240V |
| IP Rating | IP20 |
| Lifespan | 50, 000 hours |
| Weight | 6.5 kg |
| Light Source | LED |
| DMX Channels | 8 |
Details DMX channels, operational modes (DMX, Master/Slave, Static, Auto-run, Sound-active), and physical characteristics.
Lists light source, LED life, beam angle, frequency, flux, and effects like dimmer, strobe, color macros, and white balance.
Instructions on mounting, securing the unit, and identifying key components like indicator light, display, buttons, and ports.
Explains how to set DMX address and choose between 8CH or 11CH channel modes.
Details how to configure the fixture in Master or Slave modes for synchronized operation.
Describes how to select and configure modes like Fade, Sound, Auto, and Color, including speed and program selection.
Instructions for setting strobe patterns, speed, and adjusting sound control sensitivity.
Covers backlight control, white balance adjustments for Red, Green, Blue, and language selection.
Explains DMX512 connection principles, including signal wiring and the importance of termination resistance.
Details the DMX channel assignments for Dimmer, Strobe, Red, Green, Blue, White, UV, and Amber in 8CH mode.
Details DMX channel assignments for Dimmer, Red, Green, Blue, White, UV, Amber, Color, Strobe, Color Walking, and Sound Control in 11CH mode.
To Next Page
