TECshow Cubex 360 - Installation and Operation Guidance

CUBEX 360
P.
4
ENGLISH VERSION
• If the external flexible cable or cord of this lumi-
naire is damaged, it shall be exclusively replaced
by the manufacturer or his service agent or a simi-
lar qualified person in order to avoid a hazard.
• Please cut o the power if don’t use the fixture
or want to clean, maintenance.
• Please be aware that damages caused by manu-
al modifications to the device are not subject to warran-
ty. Keep away from non-professionals.
Guidance
• This device is a lighting eect for professional use
on stages, in discotheques, theaters, etc., the de
vice was designed for indoor use only.
• This fixture is only allowed to be operated with
the max alternating current which stated in the
technical specifications in the last page of this manual.
• The device can do continuous work for eight
hours. Lighting eects are not designed for per-
manent operation. Consistent operation breaks
may ensure that the device will serve you for a
long time without defects.
• Handle with care, do not make the device by
strong shocks.
• While choosing the installation-spot, please
make sure that the device is not exposed to ex-
treme heat, moisture or dust. Please don’t pro-
ject the beam onto combustible substances.The
minimum distance between light-output from
the projector and the illuminated surface must
be more than 1 meter.
• Please do not in damp, overheat or dusty envi-
ronment install and use the device. Do not use
light on fuel. The distance between the device
and the projectile to keep at least 1 meter.
• If you use the quick lock cam in hanging up the
fixture, please make sure the quick lock fasteners
turned in the quick lock holes correctly.
• Operate the device only aer having familiarized
with its functions. Do not permit operation by
persons not qualified for operating the device.
• Most damages are the result of unprofessional operation.
• Please use the original packaging if the device is
to be transported.
• For safety reasons, please be aware that all mod-
ifications on the device are forbidden.
If this device will be operated in any way dier-
ent to the one described in this manual, the prod-
uct may suer damages and the guarantee be-
comes void. Furthermore, any other operation
may lead to short-circuit, burns, electric shock,
lamp explosion, crash, etc.