EasyManua.ls Logo

TECshow Cubex 360 - Introduction and Safety; Safety and Maintenance Information; Safety Precautions

TECshow Cubex 360
34 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CUBEX 360
P.
3
2. Introduction
Thank you for having chosen this professional
moving head. You will see you have acquired a
powerful and versatile device.
Unpack the device. Inside the box you should find:
1. One DMX connection cable
2. One quick lock handle
3. One safety rope
4. One use manual
5. One power cable
ENGLISH VERSION
3. Safety and maintenance
Information
This device has le the factory in perfect condi-
tion. In order to maintain this condition and to
ensure a safe operation, it is absolutely necessa-
ry for the user to follow the safety instructions
and warning notes written in this user manual.
Damages caused by the disregard of this user
manual are not subject to warranty. The dealer
will not accept liability for any resulting defects
or problems.
If the device has been exposed to temperature
changes due to environmental changes, do not
switch it on immediately. The arising condensa-
tion could damage the device. Leave the device
switched o until it has reached room temperature.
Please make sure that the device be earthed.
Please replace housing if it is broken. This fixture
can be using aer finished installed.
The electric connection must carry out by qualified person.
Make sure that the available voltage is not higher
than stated at the end of this manual.
Make sure the power cord is never crimped or
damaged by sharp edges. If this would be the
case, replacement of the cable must be done by
an authorized dealer.

Related product manuals