5
ENGLISH VERSION
4. Installation
• The applicable temperature for the lighting is be-
tween -25°C to 45°C. Do not use the lighting under
or above the temperature.
• The installation of the eect has to be built and
constructed in a way that it can hold 10 times the
weight for 1 hour without any harming deformation.
• The installation must always be secured with a
secondary safety attachment, e.g. an appropriate
safety rope.Never stand directly below the device
when mounting, removing or servicing the fixture.
• The operator has to make sure the safety relating
and machine technical installations are approved
• by an expert before taking the device into opera-
tion for the first time.
• These installations have to be approved by a
skilled person once a year.
• Overhead mounting requires extensive experi-
ence, including amougst others calculating work-
ing load limits, installation material being used,
and periodic safety inspection of all installation
material and the device. If you lack these qualifi-
cations, do not attempt the installation yourself.
Improper installation can result in bodily injury.
Rigging
To Next Page
Loading...
