RT600 SERIES
The following objects are present inside the box:
Control unit
Instruction manual CD
2 blocks for panel mounting
1 ENABLE and relay contact terminal 5 poles pitch
5 Code: 2PL0371
1
1 supply terminal 3 poles pitch 5
Code: 2PL0367(*)
2
Motor line terminal 6 poles pitch 5
Code: 2PL0372 (*)
1MN0030 REV.
* The above terminals are optional according to the configuration purchased.
ATTENTION: always install the device using the terminals included in the pack. The use of terminals other
than those included with the control unit might cause malfunctions.
ACCESSORIES
To Next Page
Loading...
