Need help?Do you have a question about the TECSYSTEM NT935 WS and is the answer not in the manual?
General| Frequency | 50/60 Hz |
|---|---|
| Humidity | 90% non-condensing |
| Protection Degree | IP20 |
| Input Channels | 8 |
| Operating Temperature | -20 ÷ +60 °C |
| Storage Temperature | -20 ÷ +70 °C |
| Serial Port | RS485 |
| Display | LCD |
| Dimensions | 144 x 144 x 98 mm |
| Software Compatibility | TECSYSTEM software |
Connecting the unit to its power source (85-260 Vac-Vdc).
Key considerations and warnings during the programming process.
Guidelines for connecting and wiring Pt100 sensors.
Ensuring accurate signal transmission from sensors to the unit.
Detecting and reporting sensor faults (FCC, FOC, FCD).
Using sensor redundancy for enhanced system reliability.
Configuring fan operation based on temperature readings.
Modifying unit parameters and network configurations.
Configuring Wi-Fi modes (Station/Access Point) and parameters.
To Next Page