………..........................................
3) TECHNICAL SPECIFICATIONS
• OPERATING PROGRAM CONTROL
• NOTES ON SCAN AND MAN FUNCTIONS
6) ELECTRICAL CONNECTIONS
• FAULT AND RESET MESSAGE SEQUENCE
• MEASUREMENT SIGNAL TRANSFER
• TEMPERATURE SENSOR DIAGNOSTICS
• PROGRAMMED DATA DIAGNOSTICS
• TEMPERATURE DIAGNOSTICS
First of all we wish to thank you for choosing to use a TECSYSTEM product and recommend you read this instruction
manual carefully: You will understand the use of the equipment and therefore be able to take advantage of all its functions.
ATTENTION! THIS MANUAL IS VALID AND COMPLETE FOR THE NT935 WS CONTROL UNIT
To Next Page
Loading...