TecTecTec KLYR User Manual

M1
M1
1. AIM AT THE OBJECT WHOSE
DISTANCE YOU WANT TO CALCULATE.
MODE:
NORMAL
NORMAL MODE WILL ALLOW YOU TO FIND THE EXACT DISTANCE QUICKLY.
USE NORMAL MODE WHEN YOU ARE MEASURING THE DISTANCE TO AN
AREA OR A FLAG THAT IS CLEARLY DEFINED WITH A SIMPLE BACKGROUND.
NORMAL MODE IS BEST SUITED FOR TARGETS WITHIN 250 YARDS.
---
SCAN
Yd
157
SCAN
Yd
2.
PRESS THE POWER BUTTON ONCE
BRIEFLY WHILE AIMING AT A TARGET,
SUCH AS A BUNKER. THE DISPLAY
SCREEN WILL SHOW THE DISTANCE.
AFTER TAKING A MEASUREMENT,
PRESS THE POWER BUTTON AGAIN TO
FIND THE DISTANCE TO A NEW TARGET.
NOTE: NORMAL MODE AND SCAN MODE WILL NOT SHOW THE FLAG ICON
(WHICH IS THE PIN SEEKER MODE INDICATOR)
1
2
M1
M1
1. HOLD THE POWER BUTTON FOR
8 SECONDS. AT THE SAME TIME,
SWEEP THE RANGEFINDER FROM
OBJECT TO OBJECT.
2. THE DISPLAY SCREEN WILL SHOW
CONTINUOUS DISTANCE MEASURE-
MENT. PRESS THE POWER BUTTON
TO FIND THE DISTANCE TO A
NEW TARGET.
MODE:
SCAN
USE SCAN MODE WHILE IN "NORMAL MODE" JUST BY HOLDING DOWN
THE POWER BUTTON WHEN DETERMINING THE DISTANCE TO HAZARDS
AND FOR UNDERSTANDING MULTIPLE DISTANCES. USE IN WINDY CON-
DITIONS AND FOR TARGETS SURROUNDED BY BACKGROUND OBJECTS.
179
SCAN
Yd
65
SCAN
Yd
NOTE: NORMAL MODE AND SCAN MODE WILL NOT SHOW THE FLAG ICON
(WHICH IS THE PIN SEEKER MODE INDICATOR)
1
2

TecTecTec KLYR Specifications

General

Brand	TecTecTec
Model	KLYR
Category	Measuring Instruments
Language	English