Tectro TBH 565 - Setting the Heat Output

116
Speed 2 (on2)
Speed 3 (on3)
Speed 4 (on4)
Speed 5 (on5)
ECONO
TURBO
SEND
OFF 2
ON 2
ON 1
AUTO
OFF 1
CANCEL
SEND: Use this button to confirm the selected mode and send it to the stove.
ECONO
TURBO
SEND
OFF 2
ON 2
ON 1
AUTO
OFF 1
CANCEL
ECONO: Use this button to activate/deactivate the ECONO mode. Hold the
button down for at least 2 seconds to activate/deactivate this mode.
ECONO
TURBO
SEND
OFF 2
ON 2
ON 1
AUTO
OFF 1
CANCEL
TURBO: Use this button to activate/deactivate the TURBO mode. Hold the
button down for at least 2 seconds to activate/deactivate this mode.
ECONO
TURBO
SEND
OFF 2
ON 2
ON 1
AUTO
OFF 1
CANCEL
CLOCK: To set the clock mode on the remote control, proceed as follows:
1. Press
ECONO
TURBO
SEND
OFF 2
ON 2
ON 1
AUTO
OFF 1
CANCEL
2. The symbol appears and the time flashes.
3. Use the
ECONO
TURBO
SEND
OFF 2
ON 2
ON 1
AUTO
OFF 1
CANCEL
buttons to set the hours and minutes.
4. Press the
ECONO
TURBO
SEND
OFF 2
ON 2
ON 1
AUTO
OFF 1
CANCEL
again to confirm and press
ECONO
TURBO
SEND
OFF 2
ON 2
ON 1
AUTO
OFF 1
CANCEL
.
ECONO
TURBO
SEND
OFF 2
ON 2
ON 1
AUTO
OFF 1
CANCEL
ON1: Use this button to set a schedule for switching the stove on automati-
cally (programme 1).
ECONO
TURBO
SEND
OFF 2
ON 2
ON 1
AUTO
OFF 1
CANCEL
OFF1: Use this button to set a schedule for switching the stove off automat-
ically (programme 1).
ECONO
TURBO
SEND
OFF 2
ON 2
ON 1
AUTO
OFF 1
CANCEL
ON2: Use this button to set a schedule for switching the stove on automati-
cally (programme 2).
ECONO
TURBO
SEND
OFF 2
ON 2
ON 1
AUTO
OFF 1
CANCEL
OFF2: Use this button to set a schedule for switching the stove off automat-
ically (programme 2).
ECONO
TURBO
SEND
OFF 2
ON 2
ON 1
AUTO
OFF 1
CANCEL
AUTO: Use this button to repeat the set timer programmes (1 and 2) dai-
ly. Hold the button down for at least 2 seconds to activate/deactivate this
mode. The display shows AUTO.
ECONO
TURBO
SEND
OFF 2
ON 2
ON 1
AUTO
OFF 1
CANCEL
CANCEL: Use this button to cancel the programmed switch-on or switch-off
times.
SETTING THE TEMPERATURE
Use the
ECONO
TURBO
SEND
OFF 2
ON 2
ON 1
AUTO
OFF 1
CANCEL
and
ECONO
TURBO
SEND
OFF 2
ON 2
ON 1
AUTO
OFF 1
CANCEL
buttons (1&2) to set the desired temperature (from 7ºC to
40ºC). When the desired temperature has been selected, press
ECONO
TURBO
SEND
OFF 2
ON 2
ON 1
AUTO
OFF 1
CANCEL
(3). See figure 5.
SETTING THE HEAT OUTPUT
Use the
ECONO
TURBO
SEND
OFF 2
ON 2
ON 1
AUTO
OFF 1
CANCEL
button (1) to select the desired heat output setting. Then push
ECONO
TURBO
SEND
OFF 2
ON 2
ON 1
AUTO
OFF 1
CANCEL
(3). The text on1-on2-on3-on4 or on5 will appear on the stove. The power (2) will
also be shown on the remote control. You can also select Auto mode. See figure 6.
4