Power connection schematic diagram:
Connection methods:
Step 1: make sure the brand marked voltage is the same as the
mains voltage.
Step 2: insert the power cord socket into the power supply,the
other insert the mains plug to the box.
Attention:
A
A A
A
Please make sure the power cord is not pressed by wheel,
foundation, etc. Otherwise, it will damage the wire to cause
short circuit, even fire. Do not use strong power to extend and
wring the wires. Do not make the wire be near to the high
temperature object. Properly put the wire to avoid any kicking
or treading.
A
A
A
A
电源线插头
市电插盒
To Next Page
Loading...
