Tecway Kidde Dozer - Chec K and Se T Befo Re Conne Cting the Powe

NOTE：It must be placed on the flat floor to make the machine
on the ground steadily.
5.2 CHECK AND SET BEFORE CONNECTING THE POWER
1) Please check whether the parts of cabinet are loose caused
by moving, and the wire terminal should not drop out from the
port.
2) Check whether the GND is connected.
3) Please check whether the resistance of power input at the
both ends for GND is more than 100 megohm.
4) Connect the wires.
2130
2800