Why is water dripping from my TEFAL GV9220E0 Iron's soleplate?
If water is dripping from the holes in the soleplate of your TEFAL Iron, it could be due to condensation in the tubes from infrequent use. To resolve this, press the steam button away from your ironing board until the iron emits steam. Alternatively, the soleplate might not be hot enough. Ensure the iron is set to the steam zone as indicated in the user manual.
What to do if white streaks are dripping from my TEFAL GV9220E0?
If you notice white streaks dripping from the holes in the soleplate of your TEFAL Iron, it's likely due to limescale buildup in the boiler from infrequent rinsing. You should rinse the boiler as instructed in the user manual.
Why does my TEFAL GV9220E0 Iron leave water spots on my clothes?
If traces of water appear on your laundry while using your TEFAL Iron, the ironing board cover might be saturated because it's not suitable for the steam generator's power. Make sure you use a mesh ironing board to prevent condensation.
General| Power | 2600 W |
|---|---|
| Type | Steam Generator Iron |
| Vertical steam function | Yes |
| Auto shut-off | Yes |
| Calc clean system | Yes |
| Soleplate Material | Durilium Airglide |
Essential safety advice for initial use, product design, and general handling.
Guidelines on hot surfaces, unattended use, descaling, and specific warnings.
Information on electrical connections, safety systems, and approved accessories.
Recommendations on the type of water suitable for the appliance and water not to use.
Instructions for environmentally conscious disposal of the appliance.
Initial setup steps including unlocking, cord management, and plugging in the steam generator.
Using the control panel, selecting modes, and generating steam during ironing.
Utilizing boost and sequential steam modes, plus safe iron placement during ironing.
Detailed instructions on how to safely fill the water tank before use.
Steps for safely locking and transporting the steam generator iron.
Changing operating modes and selecting settings based on fabric type.
Instructions for using the vertical steaming function to remove creases from garments.
Explanation of the automatic shut-off feature and how to reactivate the appliance.
Procedure for removing and emptying the anti-calc scale collector.
Instructions for rinsing the boiler tank periodically for optimal performance.
How to clean the soleplate and plastic parts of the appliance.
Steps for safely storing the steam generator after use.
Solutions for water dripping from the soleplate and marks on laundry.
Troubleshooting soleplate problems and flashing indicator lights.
Resolving issues with the appliance not turning on or indicator lights not functioning.
To Next Page