Why is water dripping from my TEFAL GV9221E0 Iron's soleplate?
If water is dripping from the holes in the soleplate of your TEFAL Iron, it could be due to condensation in the tubes from infrequent use. To resolve this, press the steam button away from your ironing board until the iron emits steam. Alternatively, the soleplate might not be hot enough. Ensure the iron is set to the steam zone as indicated in the user manual.
What to do if white streaks are dripping from my TEFAL GV9221E0 Iron?
If you notice white streaks dripping from the holes in the soleplate of your TEFAL Iron, it's likely due to limescale buildup in the boiler from infrequent rinsing. You should rinse the boiler as instructed in the user manual.
Why does my TEFAL GV9221E0 Iron leave water spots on my clothes?
If traces of water appear on your laundry while using your TEFAL Iron, the ironing board cover might be saturated because it's not suitable for the steam generator's power. Make sure you use a mesh ironing board to prevent condensation.
General| Power | 2600 W |
|---|---|
| Heating time | 2 min |
| Vertical steam | Yes |
| Anti-calc system | Yes |
| Type | Steam generator iron |
| Steam pressure | 7.5 bar |
| Auto shut-off | Yes |
| Self-cleaning | Yes |
| Soleplate | Durilium |
Key safety advice for initial use of the product, covering general usage and user responsibilities.
Guidance on suitable and unsuitable water types for the steam generator to prevent damage and ensure optimal performance.
Initial setup steps for the steam generator, including unlocking the iron, cord management, and filling the water tank.
Instructions on how to safely fill the water tank with tap water up to the maximum level before use.
Steps to safely transport the steam generator, utilizing the lock system to secure the iron to the base.
How to change operating modes (Eco, Normal) on the control panel to adapt to different fabric types.
Instructions on how to activate the 'Boost' function for increased steam output by pressing the steam trigger multiple times.
Guide on how to use the steam generator for vertical steaming of garments, emphasizing safety precautions.
Explanation of the automatic shut-off feature after 8 minutes of inactivity and how to reactivate the appliance.
Procedure for removing and emptying the anti-calc scale collector to maintain the appliance's performance and longevity.
Recommended procedure for rinsing the boiler tank every 6 months or 25 uses to prevent scale buildup.
Instructions for cleaning the soleplate with a damp cloth and the plastic parts of the appliance.
Guidelines for safely storing the steam generator, including cord management and emptying the water tank.
To Next Page