25
• Place the steam
generator on the edge of
your sink and hold your
steam generator in an
inclined position. Use a
jug to ll the boiler tank
with 1/4 litre of untreated
tap water.
• Shake the base unit
gently for a few seconds
and then empty it
completely into the sink.
• Place the collector in its
housing by screwing it in
completely to ensure it is
watertight.
• Plug in the appliance.
• Press «ON-OFF» button to
restart the appliance.
• Press the «OK» button if
the anti calc light ashes.
MAINTENANCE AND STORAGE
ON
To Next Page
Loading...
