95
EN
1 Lid
2 Control panel
a Display screen
b Choice of programmes
c Weight selection
d Buttons for setting delayed
start and adjusting the
time for programmes 11
e Select crust colour
f On/off button
g Operating indicator light
3 Bread pan
4 Kneading paddle
5 Graduated beaker
6 Teaspoon measure/
tablespoon measure
7 Hook accessory for lifting out
kneading paddle
DESCRIPTION
The sound power level measured for this product is 66 dBa.
• Remove all packaging, stickers and various accessories both inside and
outside the appliance -
A
.
• Clean all components and the appliance using a damp cloth.
PRIOR TO FIRST USE
• Unwind the cord and plug it into an earthed electrical power outlet.
After the audio signal plays, program 1 is displayed by default -
G
.
• A slight odour may be given off when the appliance is first used.
• Remove the bread pan by lifting the handle. Next install the kneading
paddle -
B
-
C
.
• Add the ingredients in the pan in the recommended order (see the
paragraph PRACTICAL ADVICE). Make sure that all ingredients are
weighed accurately -
D
-
E
.
• Insert the bread pan -
F
.
• Close the lid.
• Select the desired program using the key.
• Press the key. The 2 points of the timer flash. The operating indicator
light lights up -
H
-
I
.
• At the end of the cooking cycle, press and unplug the bread machine.
Remove the bread pan. Always use oven mitts, because both the pan's
handle and the inside of the lid are hot. Turn out the bread while hot
and place it on a rack for 1 hr. to allow it to cool -
J
.
QUICK START-UP
To Next Page
Loading...
