6 7
USING YOUR APPLIANCE
• Press the «ON-OFF»
button on control panel.
• The «ON-OFF» button
light remains ashing
while the appliance is
warming up.
OK
• To release steam, press
and hold the steam
trigger under the iron
handle. The steam will
stop when you release
the trigger.
• The ECO mode setting
can still be selected at
this time.
• When the light stops
flashing, the steam
generator is ready for
use. This can take up to
2 minutes.
ON
USING YOUR APPLIANCE
1.1 Gettingstarted
• Unlock your steam
generator.*
• Completely unwind the
power cord and take
the water cord out of its
storage space.
• Fill the water tank with
tap water up to the max
indicator. Put the tank
back into the appliance
by pushing in until it
locks into place.
• If you have a xed water
tank, open the lid and ll
it directly with a jug of
water.
• Plug in your steam
generator.
Some models are
equipped with a lock
system to hold the iron
onto the base for easy
transport and storage.*
* Depending on model
*
* *
*
To Next Page
Loading...
Need help?
General