EasyManuals Logo

TEFAL SV6140G0 User Manual

TEFAL SV6140G0
29 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
26 27
PLEASE RETAIN THIS INSTRUCTION
BOOKLET FOR FUTURE REFERENCE
Environment protection rst !
Your appliance contains valuable materials which can be
recovered or recycled.
Leave it at a civic waste disposal centre.
waste, mineral or chemical elements that can cause
spitting, brown staining or premature wear of the
appliance.
Do not ll the water tank from the cartridge
compartment.
Empty the water tank after every use. Do not store the
steam generator with water in the water tank.
Semi-automatic self-cleaning procedure*
Never start the self-cleaning procedure when the
appliance is on its base.
Always place the iron on its cleaning stand, over a sink.
Ensure that the scale collector* is installed in the iron
and properly locked, prior to starting self-cleaning.
Never touch the iron or its cleaning stand during self-
cleaning. The cleaning accessory may still be hot; wait
at least 15 minutes before handling it.
The cleaning stand is only intended for self-
cleaning.
Never use this accessory as an iron holder
during normal use.
*depending on the model
TROUBLESHOOTING
Problem Possible Causes Solutions
Your iron is
producing
little or no
steam.
You have just lled the
tank or changed the
anti-calc cartridge, or
you have just started
using it.
Press the steam control
button continuously for
few minutes pointing it
away from your linen, in
order to prime the pump.
There is no anti calc
cartridge in the
appliance or it is not
properly installed.
Make sure the anticalc
cartridge is installed
and locked in its
compartment.
Steam cannot be
produced at the
temperature you
have selected.
Set the thermostat
control in the coloured
zone (••• or MAX).
The water tank is empty.
Fill the tank.
Water runs
out of the
holes of the
soleplate.
You are using steam
for the rst time or
you have not used it
for some time.
Press on the steam
control button away from
your ironing board until
the iron produces steam.
The setting is not
correct (1 dot / 2 dots)
and the soleplate is
not hot enough to
produce steam.
Set the iron at 3 dots (•••
or MAX) and wait for the
iron thermostat light to
go out before activating
the steam button again.
You are performing
the Anti calc
procedure.
It is normal that water
runs out of the holes
of the soleplate during
Anti calc procedure.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TEFAL SV6140G0 and is the answer not in the manual?

TEFAL SV6140G0 Specifications

General IconGeneral
BrandTEFAL
ModelSV6140G0
CategoryIron
LanguageEnglish

Related product manuals