Tegam 1830A - Page 27

10 TEGAM WAY • GENEVA, OHIO 44041 440-466-6100 • FAX 440-466-6110 • www.tegam.com
4-11
Section IV– Operating Instructions
Cal Limits (Read/Write)
Located SETUP—Maintenance menu. This control allows you to set the Cal Warning and
Cal Fail limits. These limits will be used during the calibration process for flagging warning
and failures.
• Cal Warning (Yellow) – Defaulted to 75%
• Cal Fail (Red) – Defaulted to 100%
NOTE Follow Figure 4.4 in this section to configure the USB port for communication.