10 TEGAM WAY • GENEVA, OHIO 44041 440-466-6100 • FAX 440-466-6110 • www.tegam.com
4-30
Section IV– Operating Instructions
Bad Command
The command sent was not recognized by the system
Bad Variable Name
The variable name used was not recognized by the
system
Bad Item Name
The item name used was not recognized by the system
Buffer size error
System buffers are not large enough to handle the
request
Read Only
The value that was attempted to be set, is read only
Format Wrong
The command format is incorrect
Bad Variable Index
The variable index is invalid
File Not Open
An attempt was made to write to a file that was not open
Thread Start Fail
A thread in the system failed to start correctly
Bad Variable Type
The variable type accessed is invalid
Serial Port Failed
The system failed to connect to or open the specified
serial port
TCP Port Failed
The system failed to bind to the specified serial port
Service Failed
The system failed to start the specified service
Failed to Open Memory
The system failed to open the required memory access
DIO Failed
The system failed to initialize the DIO ports
Value Out Of Range
The passed value is out of range for the system
Invalid Username
The username used to login to the system is invalid
Invalid Password
The password used to login to the system is invalid
System Is Locked
The system is currently locked to all access by another
user
Sensor Serial Number Length Too Long
To Next Page
Loading...
