5.7 Preparation for Shipment
The original shipping carton is not reusable.
The two test cables and line cord should be stored in the
side compartment and the lid closed and latched.
The Model R1M-AR is a rugged instrument and requires no
special covering, preservation or special cradles. Packaging
must provide sufficient resilient material, in accordance with
standard packaging practices, to prevent excessive shock to
the power supply and display during shipment.
5.8 Overhaul Instructions
The R1M-A is an all solid-state unit and requires no periodic
overhaul, other than routine cleaning, inspection of cables
per section 5, and calibration per section 5.5.
Tools and test equipment used for disassembly, calibration
and troubleshooting of the R1M-A are listed in section 5.3.
Troubleshooting suggestions are given in section 5.6.
To Next Page
Loading...
