EasyManuals Logo

Teka HLB 8510 P User Manual

Teka HLB 8510 P
Go to English
110 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #37 background imageLoading...
Page #37 background image
37
User Guide
English
OVEN TIMER FUNCTION
Programming the Buzzer
1. Press
or until symbol flashes on
the screen and press
. The time 00:00 is
displayed on the screen.
2. Select the time after which you want the
alarm to sound by pressing
or . You
will hear 2 beeps to confirm that the time
has been set and the clock will start count-
ing down from the selected time. Symbol
flashes slowly.
3. Once the time has expired, an acoustic sig-
nal will sound for 90 seconds and symbol
will flash quickly.
NOTE
With the Buzzer function, the oven will not
turn off when the time expires.
4. Push any key to stop the alarm. Symbol
will then disappear.
If you wish to modify the time on the buzzer, re-
peat the steps shown. Upon entering the timer
control, the time currently remaining will appear,
which you will be able to adjust.
NOTE
With the Buzzer function, the remaining time
will show permanently on the display. With
this programmed function, it is not possible
to view the time or the total programmed
cooking time.
Programming Cooking Time
1. Press
or until symbol flashes on
the screen and press
. The time 00:00 is
displayed on the screen.
2. Select the time after which you want the
alarm to sound by pressing
or . You
will hear 2 beeps to confirm that the time
has been set and the clock will start count-
ing down from the selected time. Symbol
flashes slowly.
3. Select a function and a cooking tempera-
ture using the oven commands.
4. Once the cooking time is up, the oven will
turn off, an alarm will sound and symbol
will flash quickly.
5. Press any key to stop the alarm and turn off
symbol
. The oven will switch on again.
6. Set the controls to position
to turn off
the oven.
You can change the remaining cooking time at
any time by pressing
or until symbol
starts to flash quickly. Now press
to change
the time.
NOTE
With the Cooking Time function, the remain-
ing time will be permanently displayed on the
screen. You cannot see the current time on
the display when this function is set.
Programming the Cooking Stop Time
1. Press
or until symbol flashes on
the screen and press
. You will see the
current time on the timer display.
2. Select the time after which you want the
alarm to sound by pressing
or . You
will hear 2 beeps to confirm that the time
has been set and the clock will start count-
ing down from the selected time. Symbol
flashes slowly.
3. Select a cooking function and temperature.
4. When the cycle is finished, the oven will
turn itself off, a buzzer will sound and sym-
bol
will flash quickly.
5. Press any sensor to stop the alarm and to
turn off symbol
. The oven will switch on
again.
6. Set the controls to position
to turn off
the oven.
You can change the remaining cooking time at
any time by pressing
o until symbol
starts to flash quickly. Now press to change
the time.
Programming Cooking Time and Cooking
Stop Time
1. Press
or until symbol flashes on

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Teka HLB 8510 P and is the answer not in the manual?

Teka HLB 8510 P Specifications

General IconGeneral
Oven sizeMedium
Oven typeElectric
Cleaning typePyrolytic
Bottom heatingYes
Number of ovens1
Total oven power- W
Full surface grill-
Bottom heating power1050 W
Total oven(s) interior capacity70 L
Door hingedown
Cord length1.9 m
Control typeButtons, Touch
Display typeLED
Door materialGlass
Product colorBlack
Control positionFront
Oven door openingDrop down opening
Appliance placementBuilt-in
AC input voltage220 - 240 V
Energy consumption (conventional)0.88 kWh
Energy consumption (forced convection)0.68 kWh
Weight and Dimensions IconWeight and Dimensions
Width595 mm
Installation compartment depth490 mm
Installation compartment width568 mm
Installation compartment height590 mm
Interior dimensions (W x D x H)475 x 402 x 364 mm
Installation compartment width (min)560 mm

Related product manuals