To Next Page
M
Mary JohnsonSep 13, 2025
Why does the symbol flash and a buzzer sound when I select a pyrolysis program on my Teka HSC635 Oven?
- CCasey MooreSep 13, 2025
If you've turned the control dial to the correct position and selected a pyrolysis programme (P1, P2, or P3) on your Teka Oven, but the symbol flashes quickly and a buzzer sounds, check that the oven door is properly closed. If the door is not closed properly, the door cannot be locked and the pyrolytic process is blocked. Make sure the door is properly closed, then set the control dial to the correct position and repeat the sequence to activate the pyrolysis.
General
