EasyManua.ls Logo

Teka LP2 400 - Specific Error Code Displays; Mechanical Faults

Teka LP2 400
84 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
If you take all these checks and the dishwasher still does not function
or your dishwasher have any other error display, you can power the
dishwasher OFF, and wait a few minutes. You can power the dishwasher
on, try it again , if the dishwasher still does not function and/or the
problem persists, contact the nearest authorised service center and
provide them with the following information:
the nature of the problem.
the model type number (Mod...) And the serial number (S/N...), which are indicated
on the plate located on the side of the inner part of the door.
Lower spray arm rotates with dif culty
Spray arm is blocked by small items or food remains.
Lid in detergent compartment cannot be closed
Remnants of detergent stuck inside dispenser
Compartment was damp when it was lled up with detergent. Compartment must be
dry before detergent is added.
Detergent compartment has been over lled.
Mechanism is clogged with remnants of detergent.
23
en
the drain hose is crimped or bent.
the drain hose is too high.
the water is turned on and the hose is connected properly;
the water supply to the house is on and has suf cient pressure;
the water supply hose is crimped or bent;
the lter for the water supply hose is clogged.
the drain hose is too low.
When “ ” indicators blinks.
Have you checked whether:
When “ ” indicators blinks.
Have you checked whether:
E

Related product manuals