Adjusting salt consumption
The dishwasher is designed to allow for adjusting
the amount of salt consumed based on the hardness
of the water used. This is intended to optimize and
customize the level of salt consumption so that it
remains at a minimum.
To adjust salt consumption, proceed as follows:
Unscrew the cap from the salt container;
There is a ring on the container with an arrow on it
(see fi gure to the side),
If necessary, rotate the ring in an anticlockwise
direction from the "-" setting towards the "+" sign,
based on the hardness of the water being used.
It is recommended that adjustments be made in accordance with the following table:
Water Hardness
Clarke
degrees
º
dH
mmol/l
Selector
position
Salt
consumption
(Grams/cycle)
Autonomy
(cycles/2kg)
0 - 14 0 - 17 0 - 1,7
1,8 - 4,418 - 4414 - 36
36 - 71 45 - 89 4,5 - 8,9
>89>71 >8,9
/
"-"
middle
/0
20
40
60"+"
60
40
25
Level
1
2
3
4
8
en
To Next Page
Loading...
