To Next PageTo Next Page
Need help?Do you have a question about the Teka TT 640 and is the answer not in the manual?
Read installation and connection instructions carefully before first use.
Details on placing hobs, including dimensions and ventilation requirements.
Guidance for installing the hob with a drawer or low cupboard below.
Guidance on placing the oven or control panel relative to the hob.
Instructions for securely attaching the hob to the worktop.
Procedure and safety notes for connecting the hob to the gas supply.
Details on electrical connection requirements, earthing, and safety.
Steps for connecting the hob to an oven using telescopic shafts.
Instructions for gas conversion and injector replacement for VT Dual.1.
Table detailing hob dimensions, unit placement, and configuration.
Supply voltage and frequency information common to all models.
Specific characteristics and warnings for the VT DUAL.1 model.
Essential checks and preparation before operating the hob for the first time.
Guide to operating the hob using touch control sensors and indicators.
Procedure for turning individual hotplates off.
Explanation of the residual heat indicator and its meaning.
How to turn off the entire appliance using the touch control.
Steps to connect and turn on double and triple circuit hotplates.
Procedure to disconnect double hotplates.
Procedure to disconnect triple hotplates.
How to activate child safety lock on the hob controls.
Automatic disconnection feature for safety.
Using the remote cooking feature to start cooking automatically.
Adjusting the power level while using remote cooking.
Procedure to deactivate the remote cooking function.
Using the timer to automatically switch off a hotplate.
Procedure to stop the timer before it elapses.
Quickly turning off the timer.
Using the clock as a counter on specific models.
How to connect and use the clock as a counter.
Procedure to stop the counter before its programmed time.
Explanation of how glass ceramic hotplates work and their controls.
Instructions for operating double circuit hotplates.
Information on residual heat indicators and their function.
Guidelines for optimal use of glass ceramic hotplates.
Recommendations for cleaning the hob and its components.
Table of recommended products for cleaning hob surfaces.
Cleaning instructions for light soiling on the glass surface.
Cleaning procedures for heavy dirt and sticky stains on glass.
Causes and removal of rainbow discolouration on the glass.
Removal of metallic sheens caused by pan sliding.
Safety feature preventing accidental burner ignition.
Step-by-step guide to igniting burners on VT DUAL.1 models.
Tips for optimal use of gas burners for efficiency and safety.
Maintenance instructions for cleaning burner components.
Specific maintenance checks for VT DUAL.1 models.
General
