To Next PageTo Next Page
Need help?Do you have a question about the Teka TR 600 and is the answer not in the manual?
General| Width | 600 mm |
|---|---|
| Number of burners / Cooking Zones | 4 |
| Surface Material | Glass ceramic |
| Voltage | 220-240 V |
| Frequency | 50/60 Hz |
Important safety instructions for appliance installation and initial use.
Advice on keeping guarantee certificates and technical data for appliance lifespan.
Guidelines for cutting openings and placing hobs into worktops, including dimensions.
Specific instructions for installing the hob above a cutlery drawer or low cupboard.
Guidance on placing the oven or control panel relative to the hob.
Instructions on how to secure the hob in place after positioning.
Procedure and safety requirements for connecting the hob to the gas supply.
Steps and safety considerations for connecting the hob to the electrical mains.
How to connect the hob to the oven or control panel using telescopic shafts.
Instructions and warnings regarding converting the appliance to a different gas type.
Detailed specifications for hob dimensions and placement within kitchen units.
General technical characteristics, warnings, and gas burner consumption data.
Essential checks and requirements before operating the hob for the first time.
Detailed guide to using the touch controls, including sensors and indicators.
Step-by-step instructions to turn the appliance on using touch controls.
Guide on how to select individual hotplates for operation via touch controls.
Procedures for turning off individual hotplates using touch controls.
Explanation of the indicator light showing hotplate surface temperature.
How to turn off the entire appliance via the main on/off sensor.
Information on using hotplates with multiple heating rings.
Steps to disconnect the outer ring of a double circuit hotplate.
Steps to disconnect rings on a triple circuit hotplate.
How to activate and deactivate the child safety lock for touch controls.
Automatic disconnection feature for unattended hotplates.
How to set the hob to start cooking automatically at a later time.
Adjusting the power level while the remote cooking feature is active.
Procedure to cancel the automatic cooking or remote cooking function.
How to use the integrated timer for cooking durations.
Procedures for stopping the timer, switching off rapidly, and disconnecting.
Setting a specific cooking time for a hotplate using the timer function.
How to modify an already set cooking time for the timer.
Using the clock as a standalone countdown timer when not used for hotplates.
How the hob responds to power surges and displayed error messages.
Understanding how the glass ceramic hotplates and their power regulators work.
Specific instructions for operating hotplates with two heating rings.
Guidance on using glass ceramic hotplates for optimal cooking results.
List of products suitable and unsuitable for cleaning the hob's glass and surround.
Detailed advice on cleaning glass ceramic surfaces, addressing different types of soiling.
Instructions for cleaning the hob's frame or surround.
Explanation of the safety system preventing accidental gas tap operation.
Step-by-step guide for lighting the gas burners on specific models.
Guidance on using gas burners for optimal performance and energy saving.
Procedures for cleaning burner grids and components for proper function.
Solutions for when neither hotplates nor pilot lights are functioning.
Troubleshooting steps for power surge-related errors and beeping.
Advice on resolving issues where pans stick to the glass ceramic surface.
Solutions for error messages like ER 21, ER 03, and 'AL' on specific models.
Steps to take if gas burners fail to ignite on VT DUAL.1 models.
How to clean dirty burner openings or injector holders on VT DUAL.1 models.
