Tekmar tekmarNet 4 Setpoint Control 161 Wiring Brochure

Rough In
Wiring
Rough-in
wiring
instructions
3
Information
Brochure
Choose controls
to match
application
1
Application
Brochure
Design your
mechanical
applications
2
Wiring
Brochure
Wiring and
installation of
specific control
Job
Record
Record settings &
wiring details for
future reference
6
Data
Brochure
Control settings
and sequence of
operation
5
W 161
12/08
tekmarNet
®
4 Setpoint Control 161
- Wiring Brochure
1 of 12 © 2008 W 161 - 12/08
4
Overview
The following brochure describes how to wire the
tekmarNet
®
4 (tN4) Setpoint Control 161. The 161 has a
single output for heat. The 161 has one sensor input.
Table of Contents
Definitions ....................................................................... 2
Rough-In Wiring .............................................................2
Remove the Wiring Cover ...............................................3
Mounting the Setpoint Control ........................................3
Wiring Symbols ...............................................................4
Electrical Drawings .........................................................4
Wiring the Setpoint Control .............................................7
Troubleshooting the Wiring .............................................9
Testing the Wiring ......................................................... 10
Technical Data .............................................................. 12
24 V ±10% 50/60 Hz 1.7 VA
24 V (ac) 2 A
Power:
Relays:
tN4 Setpoint Control 161
One Stage Heat
Feb 2006
Lot 1948
Meets Class B:
Canadian ICES
FCC Part 15
Cut jumper to
isolate relay
For product instructions see brochure Use at least 194°F (90°C) conductors
/
161
Relay
Contact
tN4 Network
24 V (ac) Power
Sensor Input
DIP
Switches
Jumper

Tekmar tekmarNet 4 Setpoint Control 161 Specifications

General

Brand	Tekmar
Model	tekmarNet 4 Setpoint Control 161
Category	Control Unit
Language	English