Teknatool NOVA 1624 II - User Manual

NOVA 1624 II
TM
WOODLATHE
Smart Tools Powerful Solutions
www.teknatool.com
IMPORTANT Please Note:
Your new NOVA 1624 II Woodlathe comes with additional safety feature, and is fitted with an
emergency stop button on the motor.
This button is for "Emergencies" only. The machine will coast to a stop if this button is pushed in.
Important: Once this Emergency stop button is pushed, you must release into the "OUT" position before
you can use the lathe again. You must twist to release it into the OUT position before you can turn on
the lathe.
· Use the regular STOP button if you want the lathe to come to a stop.
· To turn the machine on and off, use the on/off switch on the motor.
INSTRUCTION MANUAL PRE PRODUCTION
Publication No:111-0214-007

Summary

Welcome to the NOVA Woodlathe

Nova 1624 II Lathe Features at a glance

Add on Bed System

Describes how the bed extension increases turning capacity for longer workpieces.

Sophisticated Swivel Head

Details the features and benefits of the swivel head mechanism.

Speed Range

Explains the eight-speed range for various turning needs.

Solid Construction

Highlights the cast iron build for strength and rigidity.

Contact Teknatool Information

General Safety Rules

Additional Safety Rules for Woodlathes

Nova 1624 II Woodlathe Specifications

Setting Up Your Workshop

Workshop Requirements

Outlines essential considerations for setting up a workshop space.

Lathe Stand Recommendations

Provides guidance on selecting a sturdy and stable lathe stand.

AC Motor Recommendations

Lists recommended AC motor specifications for different regions.

Assembling the Nova 1624 II

Nova 1624 Add On Trapezoidal Bed Extension

Parts List for Bed Extension

Lists components and quantities for the bed extension kit.

Fitting Procedures for Bed Extension

Step-by-step instructions for attaching the bed extension.

Mounting the Lathe to a Support Surface

Connecting to Power

Using the Nova 1624 II

Parts of the Nova 1624;44 Woodlathe

Identifies major components of the woodlathe.

Recommended Turning Speeds

Provides a chart for selecting appropriate speeds based on work diameter.

Changing Speeds

Swiveling the Headstock

Spindle Index

Headstock Operations

Mounting a Faceplate or Chuck

Instructions for attaching faceplates and chucks to the spindle.

Using a Spur Center

Guidance on mounting a spur center for turning.

Toolrest Adjustment

Tailstock Operations

Adjusting the Tailstock for Turning Between Centers

Steps for aligning the tailstock for center turning.

Learning Turning

Maintaining the Nova 1624 II

General Maintenance

Covers routine cleaning and checks for the lathe.

Lubrication Locations

Identifies points for lubrication on the lathe.

Cleaning the Toolslide

Instructions for cleaning and lubricating the toolslide.

Cleaning the Tailstock

Aligning the Tailstock

Troubleshooting Guide

Nova 1624 II Woodlathe Parts List

Accessories

Add On Bed Extension

Extends lathe capacity for longer workpieces.

Lathe Stands

Covers cast iron and hybrid stand options for stability.

Chucks and Toolrests

Details work holding chucks and various toolrests.

Teknatool Warranty Information

Teknatool Five Year Limited Warranty

Outlines the terms and conditions of the product warranty.

Teknatool NOVA 1624 II Specifications

General

Brand	Teknatool
Model	NOVA 1624 II
Category	Lathe
Language	English