Teknatool NOVA Voyager - Maintaining the Down Feed Attachment

123-1018-001
13
MAINTAINING THE DOWN FEED ATTACHMENT
Caution! Lock the quill before remove and replace pinion shaft. Otherwise, You will damage the
depth Sensor and spindle.
WARNING! Always isolate the machine from power supply (unplug) before carrying out any maintenance
Interval
Maintenance
Monthly
Wax coat cast iron parts with a good quality paste wax. Buff out the wax thoroughly.
Check tightness of nuts and bolts.
6 Months
Lubricate the worm gear and gear shaft by releasing the down feed adjust knob and
Worm gear
Lubricate the teeth of the feed shaft assembly and quill shaft with one or two drops of
light-weight oil.