32 5
TARGET PINPOINTING
After you have identified a target using Discrimination mode,
press-and-hold the PINPOINT button to identify the target’s exact
location. This technique can yield more information about the target’s
shape and size and also find its exact location to facilitate extraction.
Pinpoint as follows:
1.
Position the searchcoil just barely off the ground, and to the side of
the target.
2. Now move the searchcoil slowly across the target; you can locate
it by the sound. The target is located directly under where the
sound is loudest.
Narrow It Down:
1.
To narrow the response further, position the center of the searchcoil
near the center of the response pattern, but not directly over the
center.
2. Release the PINPOINT button.
3. Press-and-hold PINPOINT button again.
4. Repeat this narrowing procedure to narrow the field of detection
further.
Note: Depth indication is less accurate
after narrowing.
SEARCHCOIL DRIFT
If you plan to use the
PINPOINT mode for
continuous searching,
realize that drift will occur
over time, causing the
detector to gain or lose
sensitivity. Periodic retuning
of the detector is required to
minimize drift; release and
press PINPOINT again to
retune.
ASSEMBLY
Adjusting the Arm Rest
The Arm Rest may be moved
forward or backward by removing
the single screw and nut, and then
repositioning the 2-piece Arm Rest.
Users with shorter arms may find
the Arm Rest more comfortable in
the forward position. In order to
move the Arm Rest backward, the
plastic plug must be removed from
the aluminum tube.
Arm Rest Strap
The G
2
comes with an armrest
strap for users who prefer to swing
the detector vigorously, in order to
hold the detector securely against
the arm.
The detector can always be used
without the strap, with no
compromise to detector balance
and stability under most conditions.
Sea
rch
oil
Batter
y
Compartment
(back s
ide)
Han
d-grip
Nut
Screw
Hea
dph
one
Jack
Search
Coil Cable
Locking
Collar
Loc
kin
g
Collar
Upper
Stem
Cable
Plug
S-Rod
armrest
Velcro
Strap
Velcro
Str
ap
To Next Page
Loading...
