Stock Bushing - 2.7
(Sway Bar Bushings)
Note: Swaybar bushings allow you to accurately set the amount of deadband your swaybars
have. In general, more deadband (larger diameter bushings) work better on rough tracks and
less deadband (smaller diameter bushings) work better on smooth tracks. Typically you’ll
want the bushing diameter to be ~0.3mm - 0.6mm larger than the swaybar’s diameter.
TKR1601
TKR1238
TKR9055C
TKR1445
TKR9017B
TKR1601
TKR1445
TKR5165
TKR9018
Bag G
Front End
Assembly
TKR1601
TKR5165
TKR5049A
TKR1529
TKR9055C
TKR9162B
TKR9286B
*TKR9162
(option)
*TKR9090A
(option)
*TKR9090A
(option)
*TKR9161
(option)
TKR5165
TKR9020
TKR9161B
TKR9059C
TKR5079A
TKR9017B
TKR9290
TKR9290
TKR9083 - 2.3mm
Step
G-1
Step
G-2
Step
G-3
Step
G-4
TKR1238
M4x10mm Droop Screw
x2
TKR1445
M4x14mm Button Head Screw
x3
TKR1529
M3x20mm Cap Head Screw
x2
TKR1601
M3x4mm Set Screw
x4
Optional Sway Bars
(sold separately)
*TKR9080 - 2.0mm
*TKR9081 - 2.1mm
*TKR9082 - 2.2mm
*TKR9084 - 2.4mm
*
TKR9085 - 2.5mm
*TKR9086 - 2.6mm
*TKR9088 - 2.7mm
*TKR9089 - 2.8mm
Note: With center
dot inserts,
Arm Sweep = 0°
Note:
With center
dot inserts
Kick Up = 10°
10
Stock Position
(”A” Block)
Stock Position
(”B” Block)
Thread
Lock
To Next Page
Loading...
