Tekno EB48 2.2 - Page 7

Note: With center dot
inserts, Anti-Squat = 2°
TKR1601
TKR9055C
TKR1445
TKR9017B
TKR1601
TKR1443
TKR9164C
TKR5165
TKR5165
Bag E
Rear End
Assembly
Optional Sway Bars
(sold separately)
*TKR9190 - 2.2mm
*TKR9192 - 2.3mm
*TKR9193 - 2.4mm
*TKR9195 - 2.6mm
*TKR9196 - 2.7mm
*TKR9197 - 2.8mm
*TKR9198 - 2.9mm
*TKR9199 - 3.0mm
TKR1601
TKR5165
TKR5049A
TKR9059C
TKR1529
TKR9055C
TKR9163B
TKR1238
TKR9284C
TKR5165
TKR9020
TKR5079A
TKR9017B
TKR9290
TKR9290
TKR9194 - 2.5mm
Step
E-1
Step
E-2
Step
E-3
Step
E-4
TKR1238
M4x10mm Droop Screw
x2
TKR1443
M4x10mm Button Head Screw
x1
TKR1445
M4x14mm Button Head Screw
x2
TKR1529
M3x20mm Cap Head Screw
x2
TKR1601
M3x4mm Set Screw
x4
TKRBB050825RS
Ball Bearing (5x8x2.5)
x2
*TKR9163C
(option)
*TKR9090A
(option)
*TKR9090A
(option)
*TKR9164B
(option)
Stock Bushing - 3.0
(Sway Bar Bushings)
Note: With center dot
inserts, Rear Toe = 2.5°
Stock Position
(”D” Block)
Note: Swaybar bushings allow you to accurately set the amount of deadband your swaybars
have. In general, more deadband (larger diameter bushings) work better on rough tracks and
less deadband (smaller diameter bushings) work better on smooth tracks. Typically you’ll
want the bushing diameter to be ~0.3mm - 0.6mm larger than the swaybar’s diameter.
7
Stock Position
(”C” Block)
Thread
Lock