Repackaging—492/492P Service Vol. I (SN B030000 & up)Installation and
Repackaging for Shipment
When the 492/492P is to be shipped to a Tektronix Ser
vice Center for service or repair, attach a tag showing: own
er and address, name of individual at your firm that can be
contacted, complete serial number, and a description of the
service required. If the original packaging is unfit for use of
not available, repackage the equipment as follows:
1. Obtain a carton of corrugated cardboard having inside
dimensions that are at least six inches more than the equip
ment dimensions, to allow for cushioning. Table 2-1 lists
instrument weights and carton strength requirements.
2. Install the front cover on the 492/492P and surround
the equipment with polyethylene sheeting to protect the
finish.
Table 2-1
SHIPPING CARTON TEST STRENGTH
Gross Weight
Carton Test Strength
Pounds
Kilograms Pounds
Kilograms
0 — 10
0—3.73
2 0 0
74.6
10—30 3.73—11.19
275
102.5
30—120a
11.19—44.76
375
140.0
120—140
44.76—52.22 500
186.5
140—160
52.22—59.68 600
223.8
Applicable to the 492/492P.
3. Cushion the equipment on all sides with packing ma
terial or urethane foam between the carton and the sides of
the equipment.
If you have any questions, contact your local Tektronix
4. Seal with shipping tape or industrial stapler. Field Office or representative.
To Next Page
Loading...
