Tektronix 5 Series MSO Quick Start Manual

5 Series B Mixed Signal Oscilloscopes
MSO54B, MSO56B, MSO58B
Quick Start Manual
Warning: The servicing instructions are for use by qualified personnel only. To avoid personal injury, do not perform any servicing unless you are qualified
to do so. Refer to all safety summaries prior to performing service.
Supports Product Firmware Version 1.36 and above
Register now!
Click the following link to protect your product.
tek.com/register
*P077172300*
077-1723-00 June 2023

Tektronix 5 Series MSO Specifications

General

Arbitrary/Function Generator	Optional
Spectrum Analyzer	Optional
Digital Voltmeter	Optional
Vertical Sensitivity	1 mV/div to 10 V/div
Timebase Accuracy	±5 ppm
Operating Temperature	0 °C to +50 °C
Analog Channels	4 or 6
Digital Channels	16
Record Length	62.5 Mpoints standard, expandable to 125 Mpoints
Vertical Resolution	up to 12 bits
Operating System	Windows 10
Trigger Types	Edge, Pulse Width, Logic, Rise/Fall Time, Setup/Hold, Video
Serial Protocol Support	I2C, SPI, CAN, LIN, RS-232/422/485/UART, USB, Ethernet
Input Impedance	1 MΩ
Power Requirements	100 V to 240 V, 50 Hz to 60 Hz
Connectivity	USB, LAN, HDMI
Display	15.6-inch capacitive touch display, 1920 x 1080 resolution
Waveform Capture Rate	Up to 500, 000 waveforms per second