Need help?Do you have a question about the Tektronix MSO 5 Series and is the answer not in the manual?
General| Analog Channels | 4 or 6 |
|---|---|
| Sample Rate | Up to 6.25 GS/s |
| Form Factor | Benchtop |
| Operating Temperature | 0 °C to +50 °C |
| Digital Channels | Up to 16 |
| Record Length | 125 Mpoints |
| Vertical Resolution | 12-bit |
| Display | capacitive touchscreen |
| Waveform Update Rate | > 500, 000 waveforms per second |
| Input Impedance | 1 MΩ |
| Maximum Input Voltage | 400 V (DC + peak AC) |
| Probe Interface | TekVPI |
| Bandwidth | 350 MHz - 2 GHz |
Step-by-step instructions for installing the instrument into a standard 19" equipment rack.
Procedure to connect the oscilloscope to line power and turn it on/off.
Essential safety precautions for correct and safe operation of the product.
Guidelines for safe connection and use of probes and test leads.
Safety information required for performing service on the product.
How to perform signal path compensation for accurate measurements.
Steps to test and store compensation values for TPP0500B or TPP1000 probes.
To Next Page