Tektronix AFG1022 Technical Reference

8
AFG1000 Series Specifications and Performance Verification
Specifications
Table 10: Modulation (cont.)
Characteristic Description
PM (Phase Modulation)
Carrier waveforms Sine, Square, Ramp, and Arbitrary
Modulation source Internal or External
Internal modulating
waveforms
Sine, Square, Ramp, Noise, and Arbitrary
Internal modulating frequency 2 mHz to 20.0 kHz
Phase deviation range 0.0° to 180.0°
PWM (Pulse Width Modulation) (AFG1062 only)
Carrier waveforms Pulse, ≤1 MHz
Modulation source Internal or External
Internal modulating
waveforms
Sine, Square, Ramp, and Arbitrary
Internal modulating frequency 2 mHz to 20.0 kHz
Deviation range 0.0% to 50.0% of pulse period
FSK (Frequency Shift Keying)
Carrier waveforms Sine, Square, Ramp, and Arbitrary
Modulation source Internal or External
Internal key rate 2 mHz to 100.0 kHz
Internal Modulating Waveforms 50% duty cycle square
ASK (Amplitude Shift Keying) (AFG1062 only)
Carrier waveforms Sine, Square, Ramp, and Arbitrary
Modulation source Internal or External
Internal key rate 2 mHz to 100.0 kHz
Internal Modulating Waveforms 50% duty cycle square
PSK (Phase Shift Keying) (AFG1062 only)
Carrier waveforms Sine, Square, Ramp, and Arbitrary
Modulation source Internal or External
Internal key rate 2 mHz to 100.0 kHz
Internal Modulating Waveforms 50% duty cycle square
Sweep
Carrier waveforms Sine, Square, Ramp and Arb
Type Linear or Logarithmic
Min start/stop frequency 1 μHz
Max start/stop frequency
AFG1022 Sine: 25 MHz
Square: 12.5 MHz
Ramp: 1 MHz
AFG1062
Sine: 60 MHz
Square: 30 MHz
Ramp: 2 MHz

Tektronix AFG1022 Specifications

General

Brand	Tektronix
Model	AFG1022
Category	Inverter
Language	English